1998-2002: Shanghai Jiao Tong University Ph.D
1995-1998: Zhengzhou University MS.
1991-1995: Northeast Forestry University BS.

2002-2005 Assistant Professor, Shanghai Jiao Tong University
2005-Present Associate Professor, Shanghai Jiao Tong University

2006 Visiting Scholar: La Trobe University, Australia
2009 Visiting Scholar: Purdue University, USA
2013 Research Scholar: The Ohio State University, USA

1. Material Removal process modeling
2. Machined surface integrity
3. Anti-fatigue manufacturing

2021-2024: National Natural Science Foundation of China, NSFC No.52075335, Chair.
2017-2020: National Natural Science Foundation of China, NSFC No.51675339, Chair.
2012-2015: National Natural Science Foundation of China, NSFC No. 51175331 Chair.
2008-2010: National Natural Science Foundation of China, NSFC No.50705061, Chair.
2016-2017: State Key Laboratory of Mechanical System and Vibration, Key project No. GKZD020021/006, Chair.
2016-2017: Shanghai Automobile Industry Science and Technology Development Fund, No.1614, Chair.
2012-2013: Shanghai Bearing Technical Research Center, 12H100000243, Chair.
2009-2012: International cooperative project of SJTU-GIT, Chair.
2009-2010: National Numerical Control Machine Tool and Fundamental Manufacturing Equipment Major Research Projects.2009ZX04001-121, Co-chair.
2007-2009: Project of State Science and Technology Support Program.2007BAF10B00, Co-chair.
2016-2020: National Natural Science Foundation of China, NSFC No.51535007, Principal Investigator
2015-2018: National Natural Science Foundation of China, NSFC No.51475299, Principal Investigator
2012-2014: National Science & Technology Pillar Program during the 12th Five-year Plan Period, 2012BAF06B03, Principal Investigator.

Book:
1. Ping Zhu, Manufacturing Processes, Shanghai Jiao Tong University Press. No. ISBN-978-7-111-61055-7. 2018（in charge of Chapter 10）

2. Zhenqiang Yao, Xueping Zhang. Agile Manufacturing, press of Mechanical Industry, 2004. 8, No: ISBN 7-1111-14628-X/TH.1470.

3. Chengtao Wang, Zhenqiang Yao, Ming Chen. Automotive Tribology. Shanghai Jiao Tong University Press. No. ISBN7-313-03296-X/U.108. 2002. (in charge of Chapter 7.)


Published Papers:

Peiqiang Yang, Xueping Zhang*, Zhenqiang Yao, Rajiv Shivpuri. Investigation on the Crystal Plasticity of α Phase Ti-6Al-4V Based on Nano-indentation Simulation and Experiment. Materials Characterization, 203(2023), 113074

Xin Zhang, Xijuan Liu, Xueping Zhang*. Oilstone Processing and Its Impact on the Surface Texture of Cylinder Bore. ASME Transaction, Journal of Tribology. 2023, Vol. 145(6): 061702.

Peiqiang Yang, Xueping Zhang*, Zhenqiang Yao, Rajiv Shivpuri. Evolution of Grain Refinement and Phase Transformation Based on Stress-strain Induced Incremental Model in Machining of Titanium Alloy. Proceedings of the ASME 2023 18th International Manufacturing Science and Engineering Conference. June 12-16, 2023, New Brunswick, New Jersey, USA. (MSEC2023-104620)

Xin Li, Xueping Zhang*, Zhenqiang Yao, Rajiv Shivpuri. Grinding Mechanics Evolution Based on Abrasive-bond Dynamic Contact Behavior. Proceedings of the ASME 2023 18th International Manufacturing Science and Engineering Conference. June 12-16, 2023, New Brunswick, New Jersey, USA. (MSEC2023-104554)

Xin Zhang, Xin Li, Xueping Zhang*, Zhenqiang Yao. Grinding Force Prediction Model by Discretizing Stochastic Grains. Proceedings of the ASME 2023 18th International Manufacturing Science and Engineering Conference. June 12-16, 2023, New Brunswick, New Jersey, USA. (MSEC2023-104618)

Burhan Afzal, Xueping Zhang*, Anil Srivastava. Enhanced hybrid model to predict the surface roughness of honed cylinder bore. ASME Transaction, Journal of Tribology. 2022, Vol. 144(1): 011201.

Peiqiang Yang, Xueping Zhang*, Zhenqiang Yao. Molecular dynamics modeling the nano-indentation of titanium. ASME 16th International Manufacturing Science and Engineering Conference. June 21-25, 2021, Cincinnati, Ohio, USA. (MSEC2021-59982).

Xin Li, Xueping Zhang*, Rajiv Shivpuri. Microstructure alteration in the high-speed machining of titanium involved with tool wear and cryogenic condition. ASME 16th International Manufacturing Science and Engineering Conference. June 21-25, 2021, Cincinnati, Ohio, USA. (MSEC2021-59981)

Xueping Zhang*, Zaoyang Zhou, Zhenqiang Yao, Lifeng Xi. Analytically predicting multi-dimensional accuracy of honed engine cylinder bore. ASME Transaction, Journal of Tribology. 2020,142（9）：091201：DOI: https://doi.org/10.1115/1.4046677.

Xueping Zhang*, Xijuan Liu. A new framework to explore the international vision of college teacher. International Journal for Innovation Education and Research. Vol. 8 (7): 300-310, 2020. DOI: https://doi.org/10.31686/ijier.vol8.iss7.2478

Zaoyang Zhou, Xueping Zhang*, Kunlun Lv, Jun Wu, Zhenqiang Yao, Lifeng Xi. Honed surface multi-scale prediction based on multi-stage honing process of engine cylinder bore. ASME Transaction, Journal of Tribology. Vol. 142(1), 011802:1-12, January, 2020.

Burhan Afzal, Xueping Zhang*, Anil Srivastava. A hybrid physical model based artificial neural network approach to predict surface texture in the honing of engine cylinder bore, Proceedings of the ASME 15th International Manufacturing Science and Engineering Conference. June 22-26, 2020, Cincinnati, Ohio, USA. (MSEC2020-8219).

Ayan Bhattacharya, Xueping Zhang*, Rajiv Shivpuri. Molecular dynamics study on the machining of titanium. Proceedings of the ASME 15th International Manufacturing Science and Engineering Conference. June 22-26, 2020, Cincinnati, Ohio, USA. (MSEC2020-8220).

Zaoyang Zhou, Xueping Zhang*, Kunlun Lv, Jun Wu, Zhenqiang Yao, Lifeng Xi. Simulating the sequential honing process of engine cylinder bore by modeling abrasives in honing stone. Proceedings of the ASME 2019 14th International Manufacturing Science and Engineering Conference. June 10-14, 2019, Erie, PA, USA. (MSEC2019-3049).

Liu S., Jin S., Zhang X.P*., Chen K., Tian A., & Xi L.F. A Coupled Model for the Prediction of Surface Variation in Face Milling Large-Scale Workpiece With Complex Geometry [J]. Journal of Manufacturing Science and Engineering-Transactions of the ASME, 2019.141(3):031009-14.

Jin, S., Liu, S., Zhang, X.P.*, & Chen, K. A unified prediction model of 3D surface topography in face milling considering multi-error sources [J]. International Journal of Advanced Manufacturing Technology, 2019.102(1):705-717.

Xun Ma, Wubin Xu, Xueping Zhang*, Siyi Ding. Influences of journal with 3D form errors on dynamic coefficients of hydrodynamic bearings yielded to JFO boundary conditions. Journal of Engineering Tribology. May 31, 2018. https://doi.rog/10.1177/1350650118779299.

Zaoyang Zhou, Xueping Zhang*, Kunlun Lv, Zhuang Lu, Yang Bai, Guangya Wang. Simulation of honing stone surface topography based on its processing. Proceedings of the 13th Asia-Pacific Conference on Materials Processing, 23-27 August, 2018.

Shun Liu, Sun Jin, Xueping Zhang*, Kun Chen, Ang Tian, Lifeng Xi. A coupled model for the prediction of surface variation in face milling large-scale workpiece with complex geometry. Journal of Manufacturing Science and Engineering, November, 2018 (doi:10.1115/1.4042188).

Liu S., Jin S., Zhang X.P.*, Tian A., Chen K., & Xi L.F. Prediction of Surface Variation Field in Face Milling via Finite Element Model Updating with Considering Force-Deformation Coupling [J]. International Journal of Advanced Manufacturing Technology. November 13，2019.

Liu, S., Jin, S., Zhang, X.P*., Chen, K., Wang, L.X., & Zhao, H.B. Optimization of 3D surface texture by milling for adhesive-sealing [J]. Procedia CIRP, 74 (2018) 279–284.

Xun Ma, Wubin Xu, Xueping Zhang, Fuyong Yang. Effect of form errors on oil film characteristics of hydrodynamic journal bearings based on small displacement torsor theory. Industrial Lubrication and Tribology, November, 2018. https://doi.org/10.1108/ILT-05-2017-0140

Shun Liu, Sun Jin, Xueping Zhang*, Kun Chen, Lixin Wang, Hongbo Zhao. Optimization of 3D surface roughness induced by milling operation for adhesive-sealing, Procedia CIRP 71, 2018: 279-284.

Zaoyang Zhou, Xueping Zhang*, Kunlun Lv, Guangya Li, Jun Wu, Zhuang Lu. Predicting microscale cross-hatched surface texture in engine cylinder bore. Procedia CIRP 71, 2018: 272-278.

Shun Liu, Sun Jin, Xueping Zhang*, Changhui Liu, Fuyong Yang, Jiamin Chen. Coupled predicting surface variation by face milling of engine block/head. Proceedings of the ASME 2018 13th International Manufacturing Science and Engineering Conference. June 18-22, 2018, College Station, TX, USA. (MSEC2018-6327)

Xueping Zhang*, Xiaoqing Wang, Daming Wang, Zhenqiang Yao, Lifeng Xi and Xiaojuan Wang. Methodology to improve the cylindricity of engine cylinder bore by honing. Transactions of ASME, Journal of Manufacturing Science and Engineering. 2017, 139(3) 031008-031008-10. (Doi: 10.1115/1.4034622).

Xueping Zhang*, Rajiv Shivpuri, Anil K. Srivastava. Chip Fracture Behavior in the High Speed Machining of Titanium Alloys. Transactions of ASME, Journal of Manufacturing Science and Engineering. 138(8), 081001:1-4, August, 2016. (Doi: 10.1115/1.4032583)

Xueping Zhang*, Shubiao Wu. Chip Control in the Dry Machining of Hardened AISI 1045 Steel, The International Journal of Advanced Manufacturing Technology, pp. 1~9, 20 June, 2016. (Doi: 10.1007/s00170-016-8989-2)

Xueping Zhang*, Rajiv Shivpuri, Anil Srivastava. Microstructure sensitive flow stress based on self-consistent method. Proceedings of the ASME International Manufacturing Science and Engineering Conference. June 27-July 1, 2016, Blacksburg, Virginia, USA . (ASME-MSEC 2016-8708).

Xueping Zhang*, Shubiao Wu, Zhenqiang Yao, Lifeng Xi., High speed machining of hardened AISI 1045 steel, the 12th Asia-Pacific Conference on Materials Processing, Jinan, China, 16~19 June, 2016.

Xueping Zhang*, Rajiv Shivpuri, Anil Srivastava. Role of tool flank wear and machining speed in developing of residual stresses in machined surface during high speed machining of titanium alloys. Proceedings of the 2015 ASME International Manufacturing Science and Engineering Conference. June 8-12, 2015, Charlotte, North Carolina, USA.

Xueping Zhang*, Rajiv Shivpuri, Anil K. Srivastava. Role of phase transformation in chip segmentation during high speed machining of dual phase titanium alloys. Journal of Materials Processing Technology. Vol. 214, 2014(12): 3048-3066.

Xueping Zhang*, Rajiv Shivpuri, Anil K. Srivastava. Stress triaxiality in chip segmentation in the high-speed machining of titanium alloy. Proceedings of the 2014 ASME International Manufacturing Science and Engineering Conference June 9-13, 2014, Detroit, Michigan, USA. Manuscript No. MSEC2014-3915.

Liqiang Ding, Xueping Zhang*, C.Richard Liu. Dislocation density and grain size evolution in the machining of Al6061-T6 alloys. Transactions of ASME, Journal of Manufacturing Science and Engineering, 2014, DOI: 10.1115/1.4027675.

Xia Ji, Xueping Zhang, Steven Y. Liang, Predictive modeling of residual stress in minimum quantity lubrication machining. The International Journal of Advanced Manufacturing Technology. 2014,Vol.70, Issue 9-12(2): 2159-2168.

Xia Ji, Beizhi Li, Xueping Zhang, Steven Y. Liang. The effect of minimum quantity lubrication (MQL) on machining force, temperature, and residual stress. International Journal of Precision Engineering and Manufacturing. Vol.15 (11), 2014. p.2443-2451.

Long Meng, Xueping Zhang*, A.K.Srivastva. Rapid Finite Element Prediction on Machining Process, 2013 ASME International Conference on Manufacturing Science and Engineering. June 10-14, 2013, Madison, Wisconsin, USA.

Liqiang Ding, Xueping Zhang*, C.Richard Liu. Finite Element on Dislocation Density and Grain Size Evolution in Machined Surface, 2013 ASME International Conference on Manufacturing Science and Engineering. June 10-14, 2013, Madison, Wisconsin, USA

Xia Ji, Xueping Zhang, Beizhi Li, Steven Y. Liang. Predictive modeling of minimum quantity lubrication: cutting forces, temperature and residual stress. Applied Mechanics and Materials, 2013, Vols. 365-366: 1181-1184.

Xueping Zhang*, Shenfeng Wu, C. Richard Liu. Decomposing Thermal and Mechanical Effect on the Residual Stress Profile in Hard Turning Surface by Finite Element Method, 2012 ASME International Conference on Manufacturing Science and Engineering. June 4-8, 2012, Notre Dame, Indiana, USA.

Xia Ji, Xueping Zhang, Y. Steven Liang. A New Approach to Predict Machining Force and Temperature with Minimum Quantity Lubrication, 2012 ASME International Conference on Manufacturing Science and Engineering. June 4-8, 2012, Notre Dame, Indiana, USA.

Xiaojin Xu, Liang Ding, Xueping Zhang*. Multi-scale FE modeling Inconel718 machining process and Crack initiation of brittle particle, the 10th Asia-Pacific Conference on Materials Processing, Jinan, China, 14-17 June 2012.

Zhang Xueping*, Wu Shenfeng, C.Richard Liu. The periodical fluctuation residual stress in hard turned surface and its relationship with chip formation, ASME MSEC 2011, ( MSEC2011-50197)

Zhang Xiangqin, Zhang Xueping*, Anil, K. Srivastava. Predicting the high speed cutting process of Titanium alloy by Finite Element Method. ASME MSEC 2011, ( MSEC2011-50208).

Xia Ji, Zheng Kang, Xueping Zhang*, Steven Y.Liang. A New Methodology to Validate the Cutting Temperature Theoretical Model in Super-finish Hard Machining, Advanced Science Letters, Numbers 4-5, 2011, 1561-1565

Xueping ZHANG*, Shenfeng WU, Heping WAHNG and C. Richard LIU Predicting the effects of cutting parameters and tool geometry on hard turning process using Finite Element Method, ASME Transaction, Journal of Manufacturing Science and Engineering, Vol.133, Iss.4, 2011, 041010.

Kang zheng, Ji Xia, Zhang Xueping*, Y.Steven Liang, Theoretical modeling of cutting temperature distribution by considering the material thermal properties as a function of temperature, ASME MSEC 2011, (MSEC2011-50216).

Zhang Xueping*, Wang Heping，C.Richard Liu, On predicting tool nose radius and lead angle on hard turning process by 3D finite element method, 2010 ASME International Conference on Manufacturing Science and Engineering. October 12-15, 2010, Bayfront Convention Center, Erie, PA

Wang Heping, Wu Shenfeng, Zhang Xueping*, C.Richard Liu. On predicting residual stress and chip morphology in pre-strain hard turning, 2010 ASME International Conference on Manufacturing Science and Engineering. October 12-15, 2010, Bayfront Convention Center, Erie, PA

Wu Shenfeng, Zhang Xueping*, C.Richard Liu. On predicting rake angle cutting speed and feed rate on chip morphology in hard turning, 2010 ASME International Conference on Manufacturing Science and Engineering. October 1-15, 2010, Bayfront Convention Center, Erie, PA

Wang Heping, Zhang Xueping*. Thermal-mechanical Effect on Temperature/stress Distribution when Orthogonal Cutting Bearing Steel. Progress of Machining Technology. 420-424. Key Engineering Materials Vols. 407-408, 2009.

Lu Guanghui, Zhang Xueping*, Gao Erwei. Experimental Study on the Surface Residual Stresses of GCr15 Component by Super-finishing Grinding and Fatigue Life Prediction, Key Engineering Materials Vol.416（2009）pp 45-50.

X.P.Zhang*, Erwei Gao, C.Richard Liu. Optimization of Process parameter of residual stresses for hard turned surfaces, Journal of Materials Processing Technology, Volume 209, Issue 9, 1 May 2009, 4286-4291）

Gao Erwei, Zhang Xueping*, Yao Zhenqiang. Simulation and Analysis of Flexible Solar Panels’ Deployment and Locking Processes, Journal of Shanghai Jiao Tong Univ. (Sci.),2008,13 (3):275-279.

X.P.Zhang*, C.R.Liu, Z.Q.Yao. Experimental study and evaluation methodology on hard surface integrity【J】.International Journal of Advanced Manufacturing Technology, 2007,34(8):141-148.

X.P. ZHANG*, H.C.Song, C.R.Liu. White Layer of Hard Turned Surface by Sharp CBN Tool【J】. Journal of Shanghai Jiao Tong University (Science), 2005, 36(4): 377-38620）

X.P. Zhang*, W.Q.Fan, T.Yu, Z.Q.Yao. Methodological Optimization Design on Rolling-contact Bearing Clearance, New Trends in Engineering Design, Proceedings of 15th International CIRP Design Seminar 2005, May 22-26, 2005, Shanghai, China, 446-450.

X.P. Zhang*, C.R.Liu, Z.Q.Yao. Investigational Advances in Residual Stresses by Hard Turning，Materials Science Forum-Advances in Materials Manufacturing Science and Technology, 2004,471-472 (9): 523-527

X.P. ZHANG*, AHMED Hassan，Z.YAO. Multi-body Contact Modeling and Statistical Experimental Validation for Hub Bearing Unit 【J】，Tribology International，2003,36(7):505-510.

1、Course Name: Plastic Mechanics in Metal Processing ME6125 (In English)
Teaching Target: Graduate students
Credit Hours: 48
Credit: 3

2、Course Name: Manufacturing Processes ME451 (In English)
Teaching Target: Undergraduate students
Credit Hours: 64
Credit: 4

3、Course Name: Critical Thinking and Creativity PS009 (In Chinese)
Teaching Target: Undergraduate Student
Credit Hours:32
Credit:2

1、Patent name: Precision Location Mechanism for multi-machined processes interference free system; Accredited No: ZL03116155.3．

2、Patent name：Device for grinding band wear and fatigue experiment; Accredited No: CN101140211

3、Patent name: Multiple experimental device for fretting wear of rolling contact and sliding contact behavior; Accredited No: ZL200820151175.2

4、Patent name: Anti-wear mechanism for conjugate wheel used for cam-shaft conjugated grinding process; Accredited No: CN1927538.

ASME Member
Fellow of The Higher Education Academy (FHEA)
Reviewer, ASME/MSEC, 2008-2023.
Reviewer, NSFC, 2009-2020

1、The Most Popular Teacher
School of Mechanical Engineering, Shanghai Jiao Tong University, 2017
2、Excellent Thesis Instructor Award
School of Mechanical Engineering, Shanghai Jiao Tong University, 2018