1984―1988, Nanjing University of Aeronautics and Astronautics, Doctor
1989―1991, Anhui University of Science and Technology, Master
1995―1998, Anhui University of Science and Technology, Bachelor

Fabrication and application of ultra-hard coating tools；
Cutting and grinding technology and Theory;
Equipment and Technology for fabricating chemical vapor deposition diamond films;
Computer modeling technique on deposition and characterization of thin films.

Fabrication and application of ultra-hard coating tools；
Cutting and grinding technology and Theory;
Equipment and Technology for fabricating chemical vapor deposition diamond films;
Computer modeling technique on deposition and characterization of thin films.

1 2002-2005 National High-Tech Research and Development Program (“863”program) “Application and industrialization of nano-microcrystalline composite diamond films”, Principal Investigator.
2 2005-2008 National Natural Science Foundation projects (NSFC) “Fabrication and application of ultra-smooth nanocrystalline diamodn films”, Principal Investigator.
3 2009-2010 National High-Tech Research and Development Program (“863”program) “Fabrication and application of diamond-coated tools with complicated geometries for high efficiency machining of composite materials” ,Principal Investigator.
4 2010-2012 National Natural Science Foundation projects (NSFC) “Fabrication and application of nano-microcrystalline composite diamond films coated ceramics based on the multi-layered strcture”, Principal Investigator.
5 2012—2014 the Important National Science and Technology Specific Projects ” Development of the equipment and deposition parameters of depositing diamond films on cutting tools for composite materials ”, Principal Investigator.
6 2013-2016 National Natural Science Foundation projects (NSFC)“Fundamental application research of high-grade single crystal diamond powders by chemical vapor deposition” ，Principal Investigator.
7 2018-2021 National Natural Science Foundation projects (NSFC)“Fundamental research of monolayer diamond abrasive tools fabricated by chemical vapor deposition” ，Principal Investigator.
8 2014-2016 Research Fund for the Doctoral Program of Higher Education of China “Study of fabrication and application of CVD diamond coated cemented carbide tools with ceramic interlayers”, Principle Investigator.
9 2008-2010 Shanghai Science and Technology Plan of Action for Technical Standards for Innovation and Special “Study on technological standards of diamond-coated thin films products”, Principal Investigator.
10 2008-2010 New Materials Project of Technology Innovation Action Plan Of Shanghai “Development and application of diamond composite material valve with erosion resistance, high-temperature resistance, high-pressure resistance”.
11 2009-2011 The Shanghai Science and Technology Plan of Action for Nano Science and Technology for Innovation and Special “Fabrication and application of diamond-coated tools with complicated geometries” , Principal Investigator.
12 2010-2011 The project of technicians of the ministry of science and technology serving Enterprise “Integrated development of diamond valve disc and valve seat with wear resistance and erosion resistance on pressure-reducing valve of coal liquefaction for high temperature and high pressure condition” , Principal Investigator.
13 2008-2013 Cooperation Project of university and enterprise “Development and application of equipment on hot filament chemical vapor deposition diamond films” , Principal Investigator.
14 2010―2016 Enterprise cooperation project “Development of the HFCVD equipment for depositing diamond films”, Principal Investigator.
15 2017-2019 Enterprise cooperation project “Development of the automatic HFCVD equipment for depositing diamond films”, Principal Investigator.

1 F.H.Sun, et al, Improvement of adhesive strength and surface roughness of diamond films on Co-cemented tungsten carbide tools, Diamond Related Materials, 2003, Vol.12, pp:711-718
2 Fanghong Sun, Yuping Ma, Bin Shen, Zhiming Zhang and Ming Chen, Fabrication and application of nano-microcrystalline composite diamond films on the interior-hole surfaces of Co cemented tungsten carbide substrates, Diamond and Related Materials, 2009, vol.18(2-3), pp: 276-282.
3 F.H.Sun, et al, Fabrication and application of high quality diamond-coated tools, Journal of Materials Processing Technology, 2002, Vol.129(1-3), pp:441-445
4 Sun, F.H., Zhang, Z.M., Ma, Y.P. and Chen, M., Synthesis of nanocrystalline diamond films on smooth WC-Co cemetned carbide substrate, International Journal of Abrasive Technology, 2007,vol.1, No.2, pp: 161-172.
5 F.H.Sun, et al, A new technology on enhancing heat transfer of grinding contact zone through jet impingement during creep feed grinding, Machining Science and Technology. 2002, Vol.6 (1), pp:43-52
6 F.H. Sun, et al, Fabrication and application of smooth composite diamond films, Surface Engineering, 2003, Vol.19, pp: 461-465
7 孙方宏等，高性能CVD金刚石薄膜涂层刀具的制备和试验研究，机械工程学报，2003，39卷，7期，100-106
8 孙方宏等，纳米金刚石薄膜的制备与应用，机械工程学报，2007，43卷，3期，118-122
9 Bin Shen and Fanghong Sun, Deposition and friction properties of ultra-smooth composite diamond films on Co-cemented tungsten carbide substrates, Diamond and Related Materials, 2009, Vol.18(2-3), pp: 238-243
10 Bin Shen, Fanghong Sun, Molecular dynamics investigation on the atomic-scale indentation and friction behaviors between diamond tips and copper substrate, Diamond and Related Materials, Vol.19, No.7-9, 2010: 723-728
11 Liang Wang, Xuelin Lei, Bin Shen, Fanghong Sun, Zhiming Zhang, Tribological properties and cutting performance of boron and silicon doped diamond films on Co-cemented tungsten carbide inserts, Diamond and Related Materials, 2013, Vol.33, pp:54-62
12 Xinchang Wang, Tao Zhang, Bin Shen, Jianguo Zhang, Fanghong Sun, Simulation and experimental research on the substrate temperature distribution in HFCVD diamond film growth on the inner hole surface, Surface and Coatings Technology, 2013, Vol.219(25), pp: 109–118
13 Tao Zhang, Jianguo Zhang, Bin Shen, Fanghong Sun. Simulation of temperature and gas density field distribution in diamond films growth on silicon wafer by hot filament CVD. Journal of Crystal Growth. 2012, Vol.343(1), pp:55–61
14 T. Zhang, X. Wang, B. Shen, F. Sun and Z. Zhang, The effect of deposition parameters on the morphology of micron diamond powders synthesized by HFCVD method, J. Cryst. Growth, 2013, Vol.372 (0): pp. 49-56.
15 Dongcan Zhang, Bin Shen, Fanghong Sun, Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates, Applied Surface Science, 2010, Vol.256(8), pp: 2479-2489
16 Naichao Chen, Bin Shen, Guodong Yang, Fanghong Sun, Tribological and cutting behavior of silicon nitride tools coated with monolayer- and multilayer-microcrystalline HFCVD diamond films, Applied Surface Science, 2013, Vol.265C(1), pp: 856-859
17 Yuxiao Cui, B. Shen, Fanghong Sun, Influence of amorphous ceramic interlayers on tribological properties of CVD diamond films, Applied Surface Science, 2014, Vol. 313, pp: 918-925
18 Xinchang Wang, Tianqi Zhao, Fanghong Sun, Bin Shen, Comparisons of HFCVD diamond nucleation and growth using different carbon sources, Diamond and Related Materials, 2015, Vol. 54, pp: 26-33
19 Xuelin Lei, Bin Shen, Fanghong Sun, Optimization of diamond coated micro drills in aluminum alloy 7075 machining: a case study, Diamond and Related Materials, 2015, Vol. 54, pp: 79-90
20 Xinchang Wang, Jianguo Zhang, Bin Shen, Tao Zhang, Fanghong Sun, Erosion mechanism of the boron-doped diamond films of different thicknesses, Wear, 2014, Vol. 312, pp: 1-10
21 X. C. Wang, J. G. Zhang, F. H. Sun, T. Zhang, B. Shen, Investigations on the fabrication and erosion behavior of the composite diamond coated nozzles, Wear, 2013, Vol. 304, pp: 126-137
22 Tao Zhang, Liang Wang, Fanghong Sun, Bin Shen, Zhiming Zhang, The effect of boron doping on the morphology and growth rate of micron diamond powders synthesized by HFCVD method, Diamond and Related Materials, 2013, Vol. 40, pp: 82-88
23 Yuxiao Cui, Weisong Wang, Bin Shen, Fanghong Sun, A study of CVD diamond deposition on cemented carbide ball-end milling tools with high cobalt content using amorphous ceramic interlayers, Diamond and Related Materials, 2015, Vol. 59, pp: 21-29
24 X. Wang, J. Zhang, B. Shen, T. Zhang, F. Sun, Fracture and solid particle erosion of micro-crystalline, nano-crystalline and boron doped diamond films, International Journal of Refractory Metals and Hard Materials, 2014, Vol. 45, pp: 31-40
25 X. Lei, B. Shen, L. Cheng, F. Sun, M. Chen, Influence of pretreatment and deposition parameters on the properties and cutting performance of NCD coated PCB micro drills, International Journal of Refractory Metals and Hard Materials, 2014, Vol. 43, pp: 30-41
26 X. Wang, X. Shen, F. Sun, B. Shen, Mechanical properties and solid particle erosion of MCD films synthesized using different carbon sources by BE-HFCVD, International Journal of Refractory Metals and Hard Materials, 2016, Vol. 54, pp: 370-377
27 Xinchang Wang, Liang Wang, Bin Shen, Fanghong Sun, Friction and wear performance of boron doped, undoped microcrystalline and fine grained composite diamond films, Chinese Journal of Mechanical Engineering, 2015, Vol. 28, pp: 155-163
28 J. Zhang, X. Wang, B. Shen, F. Sun, Effect of boron and silicon doping on improving the cutting performance of CVD diamond coated cutting tools in machining CFRP, International Journal of Refractory Metals and Hard Materials, 2013, Vol. 41, pp: 285-293
29 X. Wang, Z. Lin, T. Zhang, B. Shen, F. Sun, Fabrication and application of boron-doped diamond coated rectangular-hole shaped drawing dies, International Journal of Refractory Metals and Hard Materials, 2013, Vol. 41, pp: 422-431
30 Zichao Lin, Bin Shen, Fanghong Sun, Zhiming Zhang, Songshou Guo, Numerical and experimental investigation of trapezoidal wire cold drawing through a series of shaped dies, The International Journal of Advanced Manufacturing Technology, 2015, Vol. 76(5-8), pp: 1383-1391
31 Liang Wang, Bin Shen, Fanghong Sun, Zhiming Zhang, Effect of growth pressure on boron and nitrogen doped diamond films by HFCVD, Surface and Interface Analysis, 2015, Vol. 47(1), pp: 572-586
31 Xiaotian Shen, Xinchang Wang, Fanghong Sun, Chaoyue Ding, Sandblasting pretreatment for deposition of diamond films on WC-Co hard metal substrates, Diamond and related materials, 2017, Vol. 73, pp:7-14
32 X.C. Wang, C.C. Wang, F.H. Sun, C.Y. Ding, Simulation and experimental researches on HFCVD diamond film growth on small inner-hole surface of wire-drawing die with no filament through the hole. Surface and Coating Technology,2018, Vol. 339, pp:1-13
34 C.C. Wang, X.C. Wang, F.H. Sun. Tribological behavior and cutting performance of monolayer, bilayer and multilayer diamond coated milling tools in machining of zirconia ceramics. Surface and Coatings Technology, 2018, Vol.353, pp:49-57
34 X.T Shen, C.C Wang, F.H. Sun,The effects of deposition parameters on the grain morphology and wear mechanism of monolayer diamond grinding tools fabricated by hot filament CVD method , Diamond and related materials , 2018,Vol.89, pp:312-321
35 X.T Shen, X.C Wang, F.H. Sun, Fabrication and evaluation of monolayer diamond grinding tools by hot filament chemical vapor deposition method, Journal of Materials Processing Technology, 2019,Vol.265, pp:1-11

1、 Course Name：Cutting Principle & Process Control
Teaching Target: Undergraduate students
Credit Hour：36
Credit：2

2、 Course Name：Measurement and Control Technology
Teaching Target: Undergraduate students
Credit Hour：48
Credit：3

3、 Course Name：Design Principle for Manufacturing Equipment and Production Line
Teaching Target: Undergraduate students
Credit Hour：48
Credit：3

4、 Course Name：Advanced Manufacturing Techniques
Teaching Target: Master students
Credit Hour：36
Credit：3

1、Patent name：Fabrication of nanocrystalline diamond films using grid assisted hot filament CVD method
Authorization Number：ZL 200410067571.3
2、Patent name：Fabrication and application of diamond-coated bearing support implements
Authorization Number：ZL 200510027575.3
3、Patent name：Fabrication of diamond-coated drawing dies with large apertures
Authorization Number：ZL 02136951.8
4、Patent name：A method for manufacturing silicon carbide and composite diamond coated drawing dies.
Authorization Number ZL 200810040138.9
5、Patent name：Method for preparing boron doped conductive diamond thin film by chemical vapor deposition.
Authorization Number：ZL 200910045950.5
6、Patent name：A mass production method for fabricating complex-shaped cutting tools using hot filament chemical vapor deposition.
Authorization Number：ZL 201110028846.2
7、Patent name：Fabrication of diamond-coated inner hole of very large apertures with smoothness surfaces
Authorization Number：ZL 201110028847.7
8、Patent name：Preparation method for high-temperature high-differential pressure valve of diamond coating
Authorization Number：ZL 201110330198.6
9、Patent name：Method for preparing diamond film through multiple-doped hot filament chemical vapor deposition
Authorization Number：ZL 201210085095.2
10、Patent name：Preparation method of diamond coated high-temperature high-pressure spray nozzle
Authorization Number：ZL 201410005575.2

2012―2016 Member of International committee for abrasive technology （ICAT）
2009―2016 Editorial board of Diamond & Abrasives Engineering
2009―2016 Commissary of professional committee of technologies for abrasive machining, production engineering sub-association, Chinese Mechanical Engineering Society
2008―2016 Secretary-general of east China sub-association, Society of Advanced Machining and Manufacturing of CCTA
2014―2016 Editorial board of of Machinery
2013―2016 Member of super-hard materials and products sub-association, National Technical Committee 139 on Abrasives of Standardization Administration of China
2015―2016 Commissary of professional committee of super-hard materials sub-association, China Machine Tool & Tool Builders’ Association (CMTBA)

2003 Outstanding Post-Doc of Shanghai Jiao Tong University
2006 First prize of 4th inventive patent awards of Shanghai
2006 Distinguished Young Scholars of Ministry of Education New Century Outstanding Young Professors Promotion Program
2007 Shanghai Science and Technology Progress Award
2007 Honorable mention of 10th patent awards of China
2007 Master tutor for the outstanding dissertation in Shanghai
2008 Second prize of patent awards of China
2008 Second prize of Science and Technology Progress Award of Ministry of Education
2008 The most potential technical business awards of The industrial exposition of China
2010 Outstanding concluding project of NSFC
2011 Doctorial supervisor for the outstanding dissertation in Shanghai
2011 Doctorial supervisor for the third prize of 1st Hiwin Doctoral Dissertation Award
2014 First prize of science and technology award in machinery industry of China
2017 Second prize of National Prize for Progress in Science and Technology