Selected Publications
2023
1. Ma, H., Liu, Y., Lai, Y., Ouyang, H.*, Ning, J., Jiang, X., Xu, Q., 2023, "Magnetic Resonance Velocimetry of A Turbine Blade With Engine Representative Internal and Film Cooling Structures," ASME Journal of Turbomachinery, Vol. 145, No. 1, pp. 011004 (10 pages)
2. Dai, S., Ma, H.*, Xu, Z., Feng, K., 2023, “Numerical Study of Discrete Film Cooling Near the Rudder Shaft of a Hypersonic Air Fin Model,” Numerical Heat Transfer, Part A: Applications, Accepted
3. 赖佑奎,马海腾,刘一粟,欧阳华*.基于磁共振测速的复合冷却涡轮叶片流动分析.航空学报,2023,已录用
4. 刘一粟, 曾伟, 戴思明, 李家宁, 马海腾*.跨音速槽道流中绝热气膜冷却效率的求解方法.动力工程学报, 2023, 已录用
2022
5. Ma, H.*, Zeng, W., Dai, S., Jiang, H., 2022, "Sensitivity of Adiabatic Cooling Effectiveness to Mainstream and Coolant Temperatures in Transonic Flow Over an Idealized Blade Tip Model", ASME Journal of Turbomachinery, Vol. 144, No. 11, pp. 111013 (12 pages)
6. Ma, H.*, Zeng, W., Jiang, H., Hong, J., 2022, "Impact of Cooling Injection on Shock Wave over a Flat Tip in High Pressure Turbine", ASME Journal of Turbomachinery, Vol. 144, No. 1, pp. 011012 (13 pages)
7. Ma, H.*, He, L., Yu, G., Yu, Z., 2022, “Natural Convection Heat Transfer and Fluid Flow in a Thermal Chimney With Multiple Horizontally-aligned Cylinders”, International Journal of Heat and Mass Transfer, Vol. 183, Part C, pp. 122239 (13 pages)
8. Ma H.*, Zeng W., Dai S., Jiang H., 2022, "Sensitivity of Adiabatic Cooling Effectiveness to Mainstream and Coolant Temperatures in Transonic Flow Over an Idealized Blade Tip Model," ASME Turbo Expo Conference, Rotterdam, The Netherlands, Paper No. GT2022-82778
9. Ma H., Liu Y., Lai Y., Ouyang H.*, Ning J., Jiang X., Xu Q., 2022, "Magnetic Resonance Velocimetry of A Turbine Blade With Engine Representative Internal and Film Cooling Structures," ASME Turbo Expo Conference, Rotterdam, The Netherlands, Paper No. GT2022-82849
10. 曾伟, 马海腾*. 炮风洞有效测试时间的影响机制. 第十二届全国流体力学学术会议, 线上, 2022
2021
11. Ma, H.*, and He, L., 2021, “Large Eddy Simulation of Natural Convection Heat Transfer and Fluid Flow around a Horizontal Cylinder,” International Journal of Thermal Sciences, Vol. 162, pp. 106789 (15 pages).
2020
12. Lu, S.*, Ma, H., Zhang, Q., Teng, J., 2020, "Cutback Squealer Tip Trailing Edge Cooling Performance," International Journal of Heat and Mass Transfer, Vol. 154, pp. 119632 (15 pages).
2019
13. 王维杰,卢少鹏,马海腾,张强,滕金芳,余文胜.高压涡轮尾切凹槽叶尖冷却换热特性[J].航空动力学报,2019,34(10):2131-2139.
14. Ma, H.*, He, L., Rane, S., 2019, “Heat Transfer-Fluid Flow Interaction in Natural Convection around Heated Cylinder and Its Thermal Chimney Effect,” International Conference on Innovative Applied Energy, Oxford, UK
15. Rane, S., He, L., Ma, H., 2019, "CFD modelling and analysis of Two-Phase Geothermal Energy Turbine in Project Combi-Gen," International Conference on Innovative Applied Energy, Oxford, UK
16. Burnside, N., Rane, S., Yu, G., Ma, H., Montcoudiol, N., Li, W., Teklemariam, E., Boyce, A., He, L., Yu, Z., 2019, "Geothermally Sourced Combined Power and Freshwater Generation for Eastern Africa," European Geothermal Congress, Den Haag, Netherlands
2018 and before
17. Ma, H., Zhang, Q.*, He, L., Wang, Z., and Wang, L., 2017, “Cooling Injection Effect on a Transonic Squealer Tip - Part 1: Experimental Heat Transfer Results and CFD Validation,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 139, No. 5, pp. 052506 (9 pages).
18. Ma, H., Zhang, Q.*, He, L., Wang, Z., and Wang, L., 2017, “Cooling Injection Effect on a Transonic Squealer Tip - Part 2: Analysis of Aerothermal Interaction Physics,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 139, No. 5, pp. 052507 (9 pages).
19. Ma, H., Wang, Z., Wang, L., Zhang Q.*, Yang Z., and Bao Y., 2016, "Ramp Heating in High-Speed Transient Thermal Measurement with Reduced Uncertainty," AIAA Journal of Propulsion and Power, Vol. 32, No. 5, pp. 1190-1198.
20. Zhong, F., Zhou, C.*, Ma, H., and Zhang, Q., 2017, “Heat Transfer on Winglet Tips in a Transonic Turbine Cascade,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 139, No. 1, pp. 012605 (11 pages).
21. Ma, H., Zhang, Q.*, He, L., Wang, Z., and Wang, L., 2016, “Cooling Injection Effect on a Transonic Squealer Tip - Part 1: Experimental Heat Transfer Results and CFD Validation,” ASME Turbo Expo Conference, Seoul, South Korea, Paper No. GT2016-57579.
22. Ma, H., Zhang, Q.*, He, L., Wang, Z., and Wang, L, 2016, “Cooling Injection Effect on a Transonic Squealer Tip - Part 2: Analysis of Aerothermal Interaction Physics,” ASME Turbo Expo Best Paper Award, Seoul, South Korea, Paper No. GT2016-57587.
23. Ma, H., Wang, Z., Wang, L., Zhang, Q.*, Yang, Z., and Bao, Y., 2015, “Ramp Heating in High-Speed Transient Thermal Measurement with Reduced Uncertainty,” ASME Turbo Expo Conference, Montreal, Canada, Paper No. GT2015-43012.
24. Zhu, D., Lu, S., Ma, H., Zhang, Q., Teng, J., 2017, “Rotating Effect on Transonic Squealer Tip Cooling Performance,” ASME Turbo Expo Conference, Charlotte, US, Paper No. GT2017-64293.
25. Zhong, F., Zhou, C.*, Ma, H., and Zhang, Q., 2016, “Heat Transfer on Winglet Tips in a Transonic Turbine Cascade,” ASME Turbo Expo Conferenc, Seoul, South Korea, Paper No. GT2016-56804
26. Zhang, X., Yang, Z., Tian, S., and Ma, H., 2015, “Numerical Study of the Film Cooling With Discrete Hole Arrangement on a Cutback Squealer Turbine Blade Tip,” ASME Turbo Expo Conference, Montreal, Canada, Paper No. GT2015-43877
